• 
  How to determine whether the vibration of NGW-S123

  25-09-09

  To determine whether the vibration of NGW-S123-63 planetary gear reducer exceeds the standard, a comprehensive analysis should be conducted based on measurement data, operating status, and industry standards. The specific methods are as follows: 1、 Vibration numerical measurement and judgment Measurement parameters Use a vibration tester to measure the root mean square (RMS) of the vibratio

  READ MORE
• 
  How to determine whether the WPS50-30-B worm gear

  25-09-09

  To determine whether the WPS50-30-B worm gear reducer needs maintenance, a comprehensive evaluation should be conducted from three dimensions: monitoring the operating status, regular inspection items, and identifying abnormal signals. The core is to combine "listening, watching, touching, and testing" with regular data recording to timely discover potential faults and hidden dangers. The followin

  READ MORE
• 
  Introduce the machining process of CWO-125-25-IIF

  25-09-08

  The CWO-125-25-IIF worm gear reducer includes a worm gear and a worm gear, and its machining process is as follows: Worm gear processing technology Hobbing machining: Using a worm gear rolling cutter with the same basic parameters as the working worm gear, the tooth profile is cut according to the principle of generating method. There are two main methods for gear hobbing: radial feed method a

  READ MORE
• 
  What are the details to pay attention to when repl

  25-09-08

  When replacing the gears of the CWO160-12.5-2F worm gear reducer, the following details should be noted: Preparation before replacement Confirm gear parameters: The modulus and pressure angle of the new gear must be consistent with the original gear. For worm gears, it is also necessary to ensure that the lead angle of the worm matches the helix angle of the worm gear, with an error of ≤ 0.5

  READ MORE
• 
  What are the standards for vibration and noise lev

  25-09-05

  After repairing the shaft wear, the vibration and noise levels of KAB67-3KW-38.2-46 reducer can refer to the following standards: Vibration standards National standard: According to GB10068-2008 "Measurement and Evaluation of Mechanical Vibration Velocity and Acceleration", the standard value of the vibration velocity of the reducer is 0.45mm/s, and the standard value of the vibration accele

  READ MORE
• 
  How to determine whether the KF37D80N4-0.75KW redu

  25-09-05

  To determine whether the KF37D80N4-0.75KW reducer after repairing shaft wear is operating normally, the following aspects can be taken into account: Appearance and connection inspection Appearance inspection: Observe whether there is oil leakage, shell cracks or deformation in the gearbox. If there is oil leakage, it may be due to damaged seals or improper installation; Cracks or deformation

  READ MORE
• 
  How to prevent gear damage of SF57-YB1.5KW-55-M6 r

  25-09-04

  To prevent damage to the gears of the SF57-YB1.5KW-55-M6 reducer with hard tooth surfaces, the following measures can be taken: Reasonable selection and installation Correct selection: Based on actual working load, speed, transmission ratio and other parameters, choose a suitable specification of reducer to ensure that its rated load and power can meet the working requirements and avoid long

  READ MORE
• 
  What are the consequences of gear damage in SF77-2

  25-09-04

  Gear damage to the SF77-25.93-4KW hard tooth reducer can result in the following consequences: Reduced transmission efficiency: After gear damage, such as tooth surface wear and increased meshing clearance, the gear will experience slipping, impact, and other phenomena during transmission, resulting in increased losses during energy transfer and a transmission efficiency lower than 85% of the r

  READ MORE
• 
  Introduce the working principle of NGW-L82-20-55KW

  25-09-03

  The NGW-L82-20-55kW planetary gear reducer achieves reduction and torque increase through a rotating wheel system of "sun gear → planet gear → inner ring gear": the sun gear is input, the inner ring gear is fixed, and the planetary carrier is output. It uses multiple teeth to mesh simultaneously to achieve high load and efficiency, and the two-stage structure further expands the speed ratio and to

  READ MORE

CATEGORIES