• 
  What faults can occur in ZQD500+150-280 high trans

  25-07-14

  Insufficient installation accuracy can lead to abnormal vibration and noise, increased wear of gears and bearings, reduced transmission efficiency, oil leakage, and oscillation in ZQD500+150-280 high transmission ratio reducers, as follows: Abnormal vibration and noise: Insufficient installation accuracy, such as gear shafts not being parallel or the coaxiality of the reducer and motor not meet

  READ MORE
• 
  What details should be paid attention to during th

  25-07-14

  The installation process of ZQD large transmission ratio reducer requires attention to multiple details to ensure its normal operation and service life, as follows: Preparation before installation Check the components: Carefully inspect all parts of the reducer, including gears, bearings, seals, etc., to ensure that the model and specifications of the reducer match the actual requirements, a

  READ MORE
• 
  What is the troubleshooting process for abnormal v

  25-07-11

  The troubleshooting process for abnormal vibration of coaxial TY100-28-2.2KW reducer can be carried out according to the following steps: 1. Observation record: Observe the timing, frequency, and amplitude of vibration, record operating conditions such as load, speed, temperature, etc., in order to provide a basis for subsequent analysis. 2. Check the installation status: Check if the

  READ MORE
• 
  What other methods besides the above processing fl

  25-07-11

  In addition to the above processing flow, the vibration of TY140-25-11KW reducer can also be reduced by optimizing structural design, strengthening bearing maintenance, improving gear rotation, and other methods, as follows: Optimize structural design: Use finite element analysis method to simulate and analyze the stress distribution and vibration characteristics of the reducer, discover possib

  READ MORE
• 
  What are the specific lubrication methods to impro

  25-07-10

  Improving the performance of DBY280-22.4-II gear reducer can be achieved by selecting appropriate lubricants, determining lubrication methods, controlling oil levels, and conducting regular maintenance. The specific lubrication methods are as follows: Choose the appropriate lubricant: Select according to the operating conditions, workload, and speed of the gearbox. It is recommended to use lubr

  READ MORE
• 
  How to check and adjust the oil level of the lubri

  25-07-10

  The oil level of the lubrication system of the cycloidal pinwheel reducer can be checked through components such as oil gauges, and adjusted by adding or draining oil according to the inspection results. The specific method is as follows: Oil level inspection method: Observation through oil gauge or sight glass: Most cycloidal pinwheel reducers are equipped with oil gauges or sight glass, wh

  READ MORE
• 
  What are the specific contents of daily inspection

  25-07-09

  The specific contents of daily inspection of NGW51-2.8 planetary gear reducer include appearance, lubrication system, operating status, etc., as follows: Appearance inspection: Box body and accessories: Check whether the box body is intact, without damage or cracks, and whether the external components of the box body are complete, intact, and undamaged. At the same time, check whether there

  READ MORE
• 
  What is the specific process of durability verific

  25-07-09

  The durability verification of DCYK200-40-1 gear reducer can refer to the following specific process: 1. Preliminary preparation: Parameter and file confirmation: Confirm that the reducer model, speed ratio, rated torque, and other parameters are consistent with the design requirements. Check the integrity of the gear material hardness report, bearing accuracy certificate, and other document

  READ MORE
• 
  Working principle of ZQH750-23.34-III cylindrical

  25-07-08

  The working principle of the ZQH750-23.34-III cylindrical gear reducer is to use the meshing transmission of gears. By meshing the small gear with fewer teeth on the input shaft with the large gear with more teeth on the output shaft, the purpose of reducing speed and increasing torque is achieved. Specifically, as follows: Deceleration principle: The motor and other power sources drive the inp

  READ MORE

CATEGORIES