• 
  What is the specific process of durability verific

  25-07-01

  The durability verification of DCYK200-40-1 gear reducer can refer to the following specific process: 1. Preliminary preparation: Parameter and file confirmation: Confirm that the reducer model, speed ratio, rated torque, and other parameters are consistent with the design requirements. Check the integrity of the gear material hardness report, bearing accuracy certificate, and other document

  READ MORE
• 
  How to determine whether the durability verificati

  25-07-01

  To determine whether the durability verification test results of the gear reducer are qualified, the following standards can be used: Gear wear condition: In a test of 2000 hours of full load operation, it is necessary to monitor the amount of tooth surface wear, which generally requires a small amount of wear. For example, after a 20000 hour acceleration life test of a planetary gearbox, the a

  READ MORE
• 
  How to adjust the oil level of the XWED106-391-7.5

  25-06-30

  Adjust the oil level of XWED106-391-7.5 cycloidal pinwheel reducer to the appropriate range, and refer to the following methods: Determine the appropriate oil level standard: Generally, the oil level height of the cycloidal pinwheel reducer should be at the center position of the oil gauge or sight glass. Preparation work: Prepare lubricating oil that meets the requirements in advance. It is

  READ MORE
• 
  During the load adjustment of the cycloidal reduce

  25-06-30

  The specific items for regular maintenance and inspection during load commissioning of XWED117-2065-3KW cycloidal pinwheel reducer include the following aspects: Lubrication system inspection: Oil quality inspection: Regularly check the quality of lubricating oil. If the oil quality deteriorates, the color is abnormal, or there are impurities, the lubricating oil should be replaced in a time

  READ MORE
• 
  When installing the ZLYJ450-18-V reducer for the r

  25-06-27

  When installing the ZLYJ450-18-V reducer for rubber screw extruder, the concentricity can be checked by the following methods: Preliminary inspection: Equipment in place: Install the drive components (such as motors) of the reducer and rubber screw extruder on their respective foundations, ensuring that the foundations are stable and level. You can use a spirit level to check the levelness o

  READ MORE
• 
  The application of the ZLYJ330-12.5-III hard-tooth

  25-06-27

  ZLYJ330-12.5-III hard tooth reducer belongs to ZLYJ series extruder hard tooth reducer, mainly used in the following fields: Plastic machinery: It is a key supporting component of plastic extruders, which can be used for the production of various plastic pipes, sheets, films, cables, etc. During the extrusion process, it can provide stable power to the screw, accurately control the speed and to

  READ MORE
• 
  How to solve the problem of excessive vibration in

  25-06-26

  To solve the problem of excessive vibration in the ZFY800-400-I gearbox body, we can start from the following aspects: 1. Check the installation status Foundation and Connection: Check if the foundation is stable, if there are any settlement, cracks, or other issues, if the anchor bolts are loose, tighten the loose bolts, replace damaged bolts in a timely manner, and if there are any problem

  READ MORE
• 
  The standard range of vibration for the housing of

  25-06-26

  The vibration standard range of ZFY710-280-2 gearbox body is affected by various factors, as follows: 1. Installation situation Foundation stability: An unstable foundation, such as insufficient stiffness or foundation settlement, can cause significant vibrations in the gearbox during operation, leading to changes in the vibration standard range. For example, when installed on a weak steel s

  READ MORE
• 
  What are the factors related to the hazards of loo

  25-06-25

  The hazards of bolt loosening in RX107-3.5-30KW hard tooth gear reducer are related to the following factors: Degree of looseness: When the bolt is slightly loose, it may only cause slight vibration and noise in the gearbox, with little impact on equipment operation. But if the bolts are severely loose, it will cause the connection of the components to be unstable, leading to increased vibratio

  READ MORE

CATEGORIES