• 
  What are the vulnerable parts of P2SA26 planetary

  25-11-19

  There is no publicly available list of vulnerable parts for P2SA26 planetary gearboxes, but the core transmission structure and force logic of planetary gearboxes are universal. Based on the common fault patterns of this type of equipment, their vulnerable parts can be divided into three categories: core transmission components, sealing and protective components, and auxiliary fastening components

  READ MORE
• 
  How to regularly check the levelness of the motor

  25-11-18

  Regular inspections should follow the principle of "fixed cycle+standard process+precise detection", with a focus on monitoring the levelness of the base and axis, while simultaneously checking the coaxiality in conjunction to avoid cumulative deviation affecting the transmission. 1、 Determine the inspection cycle Daily inspection, once a week, quickly checks for vibration and abnormal noise d

  READ MORE
• 
  What range of horizontal deviation has a relativel

  25-11-18

  The horizontal deviation of the ZDY315-5-1 and motor should be controlled within ≤ 0.05mm/m (both longitudinal and transverse must be met), which has minimal impact on transmission efficiency (efficiency loss ≤ 1%), and is the optimal control range for industrial scenarios. Deviation interval corresponds to efficiency impact Ideal range (≤ 0.02mm/m): Efficiency loss is almost negligible (≤ 0.

  READ MORE
• 
  Recommend some application cases of WHC200-16-IV c

  25-11-17

  In WHC200-16-IV, 200 represents the center distance, 16 is the speed ratio, and IV corresponds to a specific assembly form. It has the characteristics of strong load-bearing capacity, high operating efficiency, and good stability. The maximum input power is 26KW and the maximum output torque is 2600N. m. It is suitable for heavy-duty deceleration scenarios in multiple fields such as metallurgy, mi

  READ MORE
• 
  What should be noted for the installation and main

  25-11-17

  The installation core of WHC210-50-4F worm gear reducer is to ensure coaxiality and firm fixation. The key to maintenance lies in lubricating oil management and component inspection. Specific precautions are as follows: 1、 Installation precautions Preparation before installation: Check the appearance of the reducer for any bumps or cracks in the castings, and confirm that the input and output

  READ MORE
• 
  What are the effects of high or low oil level on t

  25-11-14

  Excessive or insufficient oil level can directly damage the operational stability and service life of ZSC (A) 320-21.6-3 reducer. The core impacts are concentrated in lubrication effect, component wear, energy consumption, and leakage, as follows: 1、 The core impact of low oil level Lubrication failure exacerbates wear and tear The gear meshing surface cannot form a complete oil film, resul

  READ MORE
• 
  How to control the oil temperature of ZSC (L) 600-

  25-11-14

  ZSC (L) 600-77.5-I-Z belongs to the ZSC series of large medium hard tooth surface gear reducers, which are commonly used in heavy-duty scenarios such as mining and metallurgy. The oil temperature control of this model needs to focus on core aspects such as lubrication management, heat dissipation optimization, working condition adjustment, and real-time monitoring, combined with its heavy-duty cha

  READ MORE
• 
  Will the drying method affect the performance and

  25-11-13

  Under the standard operation of 60-80 ℃, the drying method will not have a negative impact on the performance of DCY315-35.5-1 hard tooth reducer, but can protect the equipment through dehumidification; If the temperature is out of control or operated improperly, it may cause local damage. 1. No negative impact under standardized operation Hard toothed gears undergo carburizing and quenching t

  READ MORE
• 
  What are the contents of the safety operation spec

  25-11-13

  The DCY355-50-2S reducer drying method safety operation specification revolves around four dimensions: temperature control, process monitoring, safety protection, and equipment protection, ensuring efficient drying without damaging the equipment. 1、 Preparation before operation (safety foundation) Stop the machine, cut off the power and hang a warning sign. Wait for the gearbox to cool down to

  READ MORE

CATEGORIES