• 
  How to repair the worn output shaft of XLD27-59-3K

  25-08-07

  The wear of the output shaft of XLD27-59-3KW cycloidal pinwheel reducer can be repaired according to the following methods: Analysis and determination of wear parts: First, disassemble relevant components such as the output shaft end cover and coupling, remove the output shaft from the reducer, carefully inspect the wear of the output shaft, determine whether it is bearing wear, keyway wear, or

  READ MORE
• 
  Introduce the installation method of CFD225 coolin

  25-08-07

  The installation method of CFD225 cooling tower fan reducer is as follows: 1. Preparation work: Ensure that the cooling tower has stopped running, cut off the power supply, hang warning signs to prevent accidental start-up. Prepare tools such as wrenches, screwdrivers, vernier calipers, pullers, as well as clean work areas and containers for storing parts. 2. Parts inspection and cleaning: I

  READ MORE
• 
  Selection criteria for lubricating grease of singl

  25-08-06

  The selection criteria for lubricating grease in cylindrical gear reducers mainly consider the following aspects: 1. Load pressure: Select based on the actual working load and pressure of the gear. For heavy-duty cylindrical gear reducers, lubricating grease with high base oil viscosity and thickening agent content should be selected. Lubricating grease containing extreme pressure additives or

  READ MORE
• 
  How to correctly install the output shaft of the X

  25-08-06

  The following are the steps and key points for correctly installing the output shaft of XLD12-23-0.75KW cycloidal pinwheel reducer: 1. Preparation work: Confirm that the model and specifications match the actual requirements, prepare the necessary tools for installation, such as copper bars, wrenches, etc., as well as a clean workspace, and provide an appropriate amount of lubricating oil and

  READ MORE
• 
  How to choose the appropriate lubricating oil base

  25-08-05

  When selecting lubricating oil suitable for the working environment of WPS175-80-7.5KW worm gear reducer, the following aspects need to be considered: Working temperature: Low temperature environment: If the working environment temperature is below 0 ℃, such as in winter outdoor or refrigerated places in the north, low viscosity lubricants such as VG68 or gear oils with "W" (winter) markings

  READ MORE
• 
  What are the symptoms of insufficient lubrication

  25-08-05

  The following symptoms may occur if the lubrication of the WPS32-50-B worm gear reducer is insufficient: Abnormal temperature: Excessive oil temperature: During normal operation, the gearbox experiences a certain temperature rise, but insufficient lubrication can intensify component friction, causing the heat generated to be unable to be carried away by the lubricating oil in a timely manner

  READ MORE
• 
  How to select the appropriate nitriding process fo

  25-08-04

  To choose a suitable nitriding treatment process for DCYK250-20-3 gear reducer, the following aspects need to be considered: Gear material: The gears of DCYK250-20-3 gear reducer are usually made of medium carbon steel or medium carbon alloy steel, such as 40Cr, 42CrMo, etc. If steel containing alloy elements such as Al, Cr, Mo, etc. is used, such as 38CrMoAl, it is more conducive to forming hi

  READ MORE
• 
  What specific effects does nitriding treatment hav

  25-08-04

  Nitriding treatment has the following specific effects on the performance of DCYK280-22.4-II gear reducer: Improving hardness and wear resistance: By infiltrating nitrogen atoms into the surface of the gear, a high hardness nitride layer is formed, which can significantly increase the surface hardness of the gear, such as reaching HV600 or above, effectively resist friction and wear between too

  READ MORE
• 
  When adjusting the eccentric bushing of the XLED81

  25-08-02

  When adjusting the eccentric sleeve of XLED8115A-377-0.37KW cycloidal reducer, the following are some precautions: 1. Preparation work: Prepare the necessary tools in advance, such as suitable wrenches, vernier calipers, dial gauges and other measuring tools, as well as cleaning supplies, lubricants, etc. At the same time, it is necessary to ensure that the workplace is clean and tidy, free fro

  READ MORE

CATEGORIES