• 
  How to choose the right seal for a TY115-18-7.5KW

  25-08-14

  Select the sealing components suitable for TY115-18-7.5KW hard tooth surface gear reducer. The specific selection method is as follows: Considering working temperature: If the working temperature of TY115-18-7.5KW hard tooth surface gear reducer is between -30 ℃ and 120 ℃, nitrile rubber (NBR) material seals such as nitrile skeleton oil seals can be selected, which have high cost-effectiveness

  READ MORE
• 
  What are the safety precautions to be taken when c

  25-08-13

  When checking for loose screws in the ZSY160-40-1 hard tooth reducer, special attention should be paid to the following safety precautions: do your homework Disconnect power supply: Before inspection, it is necessary to disconnect the power supply of the gearbox and ensure that the power switch is locked or hung to prevent accidental power on and personal injury. Wear protective equipment

  READ MORE
• 
  What tools are needed to check the noise of ZSY315

  25-08-13

  When checking the noise of ZSY315-63-1 gear reducer, the following tools are required: Noise measurement tool: Sound level meter: used to measure the noise pressure level during the operation of the gearbox, in order to determine whether the intensity of the noise meets relevant standards. The overall noise level of the gearbox can be obtained through a sound level meter, providing a quantit

  READ MORE
• 
  How to prevent deformation of the output shaft of

  25-08-12

  To prevent deformation of the output shaft of BLD13-35-3KW cycloidal pinwheel reducer, the following measures can be taken: Reasonable selection and installation Correct selection: Choose the appropriate reducer based on the actual load situation, ensuring that the rated output torque of the selected reducer is greater than the maximum working torque required in practice. Generally speaking,

  READ MORE
• 
  The input speed and output speed of the NCD450-250

  25-08-12

  The input and output speeds of the NCD450-250 planetary gearbox are related to the following factors: Input speed related factors Rated input speed: This is the maximum limit input speed at which the gearbox can operate correctly, determined by factors such as the design, manufacturing process, and materials of the gearbox. The actual input speed cannot exceed the rated input speed, otherwis

  READ MORE
• 
  Product features and technical parameters of P3SB2

  25-08-11

  P3SB20 high-power planetary gear reducer is a model of the P series planetary gear reducer, which has the following characteristics and related information: Product features: Reasonable structural design: Adopting involute planetary gear transmission, making reasonable use of internal and external meshing and power splitting, it has the advantages of light weight and small volume. Excelle

  READ MORE
• 
  Can the lubrication system of BLY22-23-4 cycloidal

  25-08-11

  The lubrication system of BLY22-23-4 cycloidal pinwheel reducer can be modified on its own under certain conditions, but caution is needed. The lubrication system modification of cycloidal pinwheel reducers is usually aimed at improving lubrication efficiency, adapting to special working environments, or enhancing equipment reliability. For example, in low-temperature environments, heating device

  READ MORE
• 
  How to determine the optimal lubricating oil amoun

  25-08-08

  The method for determining the optimal amount of lubricating oil for WPA120-15-B worm gear reducer is as follows: Reference equipment manual: Refer to the user manual or technical documentation provided by the gearbox manufacturer, which will clearly indicate the recommended oil level range or specific oil quantity for this model of gearbox. According to the oil level marking: If the gearbox

  READ MORE
• 
  How to adjust the lubricating oil quantity based o

  25-08-08

  The following is the method for adjusting the amount of lubricating oil based on the working environment of WPA147-30-A worm gear reducer: High temperature environment: When the working environment temperature is above 40 ℃, it is recommended to increase the oil volume by 3% -5% for every 5 ℃ increase to compensate for evaporation losses and strengthen heat dissipation. For example, if the ambi

  READ MORE

CATEGORIES