• 
  What factors are related to the transmission effic

  25-09-29

  The transmission efficiency of WPDX135-40-3KW worm gear reducer (usually in the range of 65%~80%) is influenced by various factors, and the core revolves around the characteristics of "sliding friction dominant and multi component collaborative work" of worm gear transmission. It can be mainly classified into four categories: core characteristics of meshing pairs, lubrication system status, struct

  READ MORE
• 
  How to check the oil level of BLEY141-59-35 cycloi

  25-09-26

  Oil level inspection should be carried out when the gearbox is stopped, the oil temperature drops to room temperature (20-40 ℃), and the equipment is installed horizontally to avoid reading deviation caused by oil flow or equipment tilt. The specific steps are as follows: 1. Prepare tools and safety prerequisites Tools: cloth, oil level gauge (if not included), flashlight (for observing intern

  READ MORE
• 
  Technical parameters and working principle of WPDX

  25-09-26

  is a common reduction equipment, and its detailed introduction is as follows: Technical Specifications: Input power: 1.5KW Reduction ratio: Common reduction ratios include 1:10, 1:15, 1:20, 1:25, 1:30, 1:40, 1:50, 1:60, etc. Dimensions: A size is 225mm, AB size is 125mm, BB size is 142mm, BC size is 70mm, CC size is 80mm, M size is 175mm, N size is 320mm, E size is 140mm, E1 size is 1

  READ MORE
• 
  How to adjust the self-locking performance of NMRV

  25-09-24

  The self-locking performance of NMRV030-30-63B14 worm gear reducer mainly depends on the relationship between the lead angle of the worm gear and the friction angle of the worm gear contact. When the lead angle of the worm gear is less than or equal to the equivalent friction angle, the mechanism has self-locking properties. The self-locking performance can be adjusted by the following methods:

  READ MORE
• 
  What are the models and variants of NMRV090-25-2.2

  25-09-24

  The NMRV090-25-2.2KW worm gear reducer has the following model variants: Classified by input method: NMRV type: with input flange worm gear reducer, such as NMRV090-25-2.2KW. NRV type: with input shaft worm gear reducer, such as NRV090-25-2.2KW. Classified by combination form: PC type: equipped with a front helical gear reduction module worm reducer, if combined with NMRV090, can fo

  READ MORE
• 
  What are the precautions for installing F67-66.13-

  25-09-23

  The following are key precautions for the installation of F67-66.13-2.2KW reducer bearings, combined with installation specifications and common problems for comprehensive explanation: 1、 Preparation before installation Cleaning and Inspection Clean the bearings and shaft necks with refined kerosene to ensure no metal debris residue, and only wipe the surface of the sealed bearings with rus

  READ MORE
• 
  How to choose bearings suitable for parallel axis

  25-09-23

  The following is a selection guide for selecting bearings suitable for parallel axis F57-NA40-1.1KW gear reducers, combined with load characteristics, installation space, and operating requirements for comprehensive explanation: 1、 Core parameters for bearing selection Load characteristic analysis Radial load: Parallel axis gear reducers mainly bear radial loads, and deep groove ball bearin

  READ MORE
• 
  Structural Design and Principle of WS120-60-II Wor

  25-09-22

  The following is a comprehensive analysis of the structural design and principle of WS120-60-II worm gear reducer: 1. Basic structure and transmission principle The WS120-60-II reducer adopts worm gear transmission, and its core structure includes: Worm: As an active component, it is usually designed with single or multiple helical teeth and made of quenched steel (such as 20CrMnTi) to impr

  READ MORE
• 
  How long is the service life of WS210-41-V worm ge

  25-09-22

  The service life of WS210-41-V worm gear reducer is affected by various factors. Generally speaking, under normal use and maintenance conditions, its service life is usually around 5-10 years. But if the design is reasonable, the material selection is appropriate, and the maintenance is proper, its service life may also be longer, even up to 10 years or more. The following is an analysis of specif

  READ MORE

CATEGORIES