• 
  What are the advantages and disadvantages of ZS85-

  25-07-16

  The advantages of ZS85-160-III soft tooth surface gear reducer include smooth transmission, strong adaptability, and low manufacturing and maintenance costs. The main disadvantages are limited load-bearing capacity and short service life, as follows: advantage: Smooth transmission and low noise: Soft tooth surface reducers usually use involute helical cylindrical gear transmission, which mak

  READ MORE
• 
  What are the precautions for adjusting the speed r

  25-07-15

  When adjusting the speed ratio of ZL850-20 soft tooth surface reducer, the following precautions should be taken: Confirm the parameters and specifications of the gearbox: Before adjusting the speed ratio, it is necessary to first confirm whether the speed ratio, rated torque, input power and other parameters of the gearbox meet the actual needs, to ensure that the adjusted speed ratio can enab

  READ MORE
• 
  How to determine the optimal gear ratio for the ZS

  25-07-15

  To determine the optimal speed ratio of ZS60 cylindrical gear reducer, it is necessary to comprehensively consider factors such as load demand, motor speed, and transmission efficiency. The specific methods are as follows: Calculate based on load torque and speed requirements: Firstly, clarify the required output torque (T) and output speed (n2) of the working mechanism, as well as the rated po

  READ MORE
• 
  What faults can occur in ZQD500+150-280 high trans

  25-07-14

  Insufficient installation accuracy can lead to abnormal vibration and noise, increased wear of gears and bearings, reduced transmission efficiency, oil leakage, and oscillation in ZQD500+150-280 high transmission ratio reducers, as follows: Abnormal vibration and noise: Insufficient installation accuracy, such as gear shafts not being parallel or the coaxiality of the reducer and motor not meet

  READ MORE
• 
  What details should be paid attention to during th

  25-07-14

  The installation process of ZQD large transmission ratio reducer requires attention to multiple details to ensure its normal operation and service life, as follows: Preparation before installation Check the components: Carefully inspect all parts of the reducer, including gears, bearings, seals, etc., to ensure that the model and specifications of the reducer match the actual requirements, a

  READ MORE
• 
  What is the troubleshooting process for abnormal v

  25-07-11

  The troubleshooting process for abnormal vibration of coaxial TY100-28-2.2KW reducer can be carried out according to the following steps: 1. Observation record: Observe the timing, frequency, and amplitude of vibration, record operating conditions such as load, speed, temperature, etc., in order to provide a basis for subsequent analysis. 2. Check the installation status: Check if the

  READ MORE
• 
  What other methods besides the above processing fl

  25-07-11

  In addition to the above processing flow, the vibration of TY140-25-11KW reducer can also be reduced by optimizing structural design, strengthening bearing maintenance, improving gear rotation, and other methods, as follows: Optimize structural design: Use finite element analysis method to simulate and analyze the stress distribution and vibration characteristics of the reducer, discover possib

  READ MORE
• 
  What are the specific lubrication methods to impro

  25-07-10

  Improving the performance of DBY280-22.4-II gear reducer can be achieved by selecting appropriate lubricants, determining lubrication methods, controlling oil levels, and conducting regular maintenance. The specific lubrication methods are as follows: Choose the appropriate lubricant: Select according to the operating conditions, workload, and speed of the gearbox. It is recommended to use lubr

  READ MORE
• 
  How to check and adjust the oil level of the lubri

  25-07-10

  The oil level of the lubrication system of the cycloidal pinwheel reducer can be checked through components such as oil gauges, and adjusted by adding or draining oil according to the inspection results. The specific method is as follows: Oil level inspection method: Observation through oil gauge or sight glass: Most cycloidal pinwheel reducers are equipped with oil gauges or sight glass, wh

  READ MORE

CATEGORIES