How to determine the amount of lubricating grease for R67-113.94-0.75KW gearbox

The amount of lubricating grease for R67-113.94-0.75KW gearbox can usually be determined according to the following methods:

Refer to the manufacturer's guide: The user manual or technical documentation provided by the gearbox manufacturer will clearly indicate the required amount of lubricating grease or oil level range for a specific model of gearbox, which is the primary basis for determining the amount of grease to be added.

According to the installation method, the lubricating oil filling amount of R67 reducer varies depending on the installation method. For example, M1 installation is 0.3/0.95L, M2 installation is 0.85L, M3 installation is 0.95L, M4 installation is 1.05L, M5 installation is 0.75L, M6 installation is 0.95L.

According to the oil level markings: Many decelerators are equipped with oil windows or dipsticks, which can be used to determine the filling amount. The oil level of the lubricating grease should be maintained between the highest oil level line (MAX) and the lowest oil level line (MIN).

Consider working conditions: If the gearbox operates in a high-temperature environment, or if the equipment load rate exceeds 80% of the rated power, or if there are frequent start stop, impact load, and other working conditions, it may be necessary to increase the amount of lubricating grease added appropriately. For example, when the equipment load rate exceeds 80% of the rated power, it is recommended to increase the lubrication amount by 5% -8%; When the ambient temperature exceeds 35 ℃, a 3% increase in oil compensation is required for every 5 ℃ increase; For working conditions with frequent start stop or impact loads, an additional 10% of lubricating grease should be added.